[Linux Ubuntu 9.10] Problemy z kartą sieciową Wi-Fi

Oto wynik dmesg (btw, "iwlist wlan0 scan" nie działa...)
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.31-14-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 (Ubuntu 2.6.31-14.48-generic)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000005ffb0000 (usable)
[    0.000000]  BIOS-e820: 000000005ffb0000 - 000000005ffc0000 (ACPI data)
[    0.000000]  BIOS-e820: 000000005ffc0000 - 000000005fff0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000005fff0000 - 0000000060000000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000] DMI present.
[    0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0x5ffb0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FFC0000000 write-back
[    0.000000]   1 base 0040000000 mask FFE0000000 write-back
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] Scanning 0 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)
[    0.000000]  modified: 0000000000010000 - 000000000009fc00 (usable)
[    0.000000]  modified: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000e8000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 000000005ffb0000 (usable)
[    0.000000]  modified: 000000005ffb0000 - 000000005ffc0000 (ACPI data)
[    0.000000]  modified: 000000005ffc0000 - 000000005fff0000 (ACPI NVS)
[    0.000000]  modified: 000000005fff0000 - 0000000060000000 (reserved)
[    0.000000]  modified: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000] initial memory mapped : 0 - 00c00000
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000] Using x86 segment limits to approximate NX protection
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
[    0.000000] RAMDISK: 378a5000 - 37fef7e9
[    0.000000] Allocated new RAMDISK: 008ad000 - 00ff77e9
[    0.000000] Move RAMDISK from 00000000378a5000 - 0000000037fef7e8 to 008ad000 - 00ff77e8
[    0.000000] ACPI: RSDP 000fa2a0 00014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 5ffb0000 00030 (v01 A M I  OEMRSDT  10000820 MSFT 00000097)
[    0.000000] ACPI: FACP 5ffb0200 00084 (v02 A M I  OEMFACP  12000601 MSFT 00000097)
[    0.000000] ACPI: DSDT 5ffb03f0 04019 (v01  K8N3V K8N3V111 00000111 INTL 02002026)
[    0.000000] ACPI: FACS 5ffc0000 00040
[    0.000000] ACPI: APIC 5ffb0390 0005C (v01 A M I  OEMAPIC  10000820 MSFT 00000097)
[    0.000000] ACPI: OEMB 5ffc0040 00056 (v01 A M I  AMI_OEM  10000820 MSFT 00000097)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 647MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000]   node 0 low ram: 00000000 - 377fe000
[    0.000000]   node 0 bootmap 00011000 - 00017f00
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0000100000 - 00008a80a0]    TEXT DATA BSS ==> [0000100000 - 00008a80a0]
[    0.000000]   #4 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
[    0.000000]   #5 [00008a9000 - 00008ac12f]              BRK ==> [00008a9000 - 00008ac12f]
[    0.000000]   #6 [0000010000 - 0000011000]          PGTABLE ==> [0000010000 - 0000011000]
[    0.000000]   #7 [00008ad000 - 0000ff77e9]      NEW RAMDISK ==> [00008ad000 - 0000ff77e9]
[    0.000000]   #8 [0000011000 - 0000018000]          BOOTMAP ==> [0000011000 - 0000018000]
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x0005ffb0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0005ffb0
[    0.000000] On node 0 totalpages: 393023
[    0.000000] free_area_init_node: node 0, pgdat c0784900, node_mem_map c1000200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 1296 pages used for memmap
[    0.000000]   HighMem zone: 164514 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] Nvidia board detected. Ignoring ACPI timer override.
[    0.000000] If you got timer trouble try acpi_use_timer_override
[    0.000000] Detected use of extended apic ids on hypertransport bus
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
[    0.000000] PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 60000000 (gap: 60000000:9f000000)
[    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages at c1c07000, static data 35612 bytes
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 389951
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-14-generic root=UUID=a3685802-b90e-4f21-b61a-1d15c49483d0 ro quiet splash
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] allocated 7862400 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (000377fe:0005ffb0)
[    0.000000] Memory: 1534920k/1572544k available (4565k kernel code, 36248k reserved, 2143k data, 540k init, 663240k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc078e000 - 0xc0815000   ( 540 kB)
[    0.000000]       .data : 0xc0575554 - 0xc078d308   (2143 kB)
[    0.000000]       .text : 0xc0100000 - 0xc0575554   (4565 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] NR_IRQS:2304 nr_irqs:424
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1640.060 MHz processor.
[    0.000014] spurious 8259A interrupt: IRQ7.
[    0.001848] Console: colour VGA+ 80x25
[    0.001852] console [tty0] enabled
[    0.004011] Calibrating delay loop (skipped), value calculated using timer frequency.. 3280.12 BogoMIPS (lpj=6560240)
[    0.004049] Security Framework initialized
[    0.004082] AppArmor: AppArmor initialized
[    0.004092] Mount-cache hash table entries: 512
[    0.004286] Initializing cgroup subsys ns
[    0.004292] Initializing cgroup subsys cpuacct
[    0.004297] Initializing cgroup subsys memory
[    0.004306] Initializing cgroup subsys freezer
[    0.004309] Initializing cgroup subsys net_cls
[    0.004325] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.004328] CPU: L2 Cache: 256K (64 bytes/line)
[    0.004334] mce: CPU supports 5 MCE banks
[    0.004355] Performance Counters: AMD PMU driver.
[    0.004364] ... version:                 0
[    0.004366] ... bit width:               48
[    0.004369] ... generic counters:        4
[    0.004371] ... value mask:              0000ffffffffffff
[    0.004374] ... max period:              00007fffffffffff
[    0.004376] ... fixed-purpose counters:  0
[    0.004378] ... counter mask:            000000000000000f
[    0.004384] Checking 'hlt' instruction... OK.
[    0.020842] SMP alternatives: switching to UP code
[    0.027902] ACPI: Core revision 20090521
[    0.035101] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[    0.074797] CPU0: AMD Sempron™ Processor 2800+ stepping 00
[    0.076001] Brought up 1 CPUs
[    0.076001] Total of 1 processors activated (3280.12 BogoMIPS).
[    0.076001] CPU0 attaching NULL sched-domain.
[    0.076001] Booting paravirtualized kernel on bare hardware
[    0.076001] regulator: core version 0.5
[    0.076001] Time:  4:18:12  Date: 01/31/10
[    0.076001] NET: Registered protocol family 16
[    0.076001] EISA bus registered
[    0.076001] ACPI: bus type pci registered
[    0.076001] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=2
[    0.076001] PCI: Using configuration type 1 for base access
[    0.076001] bio: create slab <bio-0> at 0
[    0.076001] ACPI: EC: Look up EC in DSDT
[    0.081577] ACPI: Interpreter enabled
[    0.081584] ACPI: (supports S0 S1 S3 S4 S5)
[    0.081611] ACPI: Using IOAPIC for interrupt routing
[    0.088989] ACPI: Power Resource [ISAV] (on)
[    0.089058] ACPI Warning: Incorrect checksum in table [OEMB] - 9D, should be 90 20090521 tbutils-246
[    0.089170] ACPI: No dock devices found.
[    0.089303] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.089352] pci 0000:00:00.0: reg 10 32bit mmio: [0xd0000000-0xdfffffff]
[    0.089429] pci 0000:00:01.1: reg 10 io port: [0x5080-0x509f]
[    0.089438] pci 0000:00:01.1: reg 20 io port: [0x5000-0x503f]
[    0.089443] pci 0000:00:01.1: reg 24 io port: [0x5040-0x507f]
[    0.089455] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.089458] pci 0000:00:01.1: PME# disabled
[    0.089480] pci 0000:00:02.0: reg 10 32bit mmio: [0xfe9fd000-0xfe9fdfff]
[    0.089498] pci 0000:00:02.0: supports D1 D2
[    0.089501] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.089505] pci 0000:00:02.0: PME# disabled
[    0.089522] pci 0000:00:02.1: reg 10 32bit mmio: [0xfe9fe000-0xfe9fefff]
[    0.089540] pci 0000:00:02.1: supports D1 D2
[    0.089543] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.089546] pci 0000:00:02.1: PME# disabled
[    0.089566] pci 0000:00:02.2: reg 10 32bit mmio: [0xfe9ffc00-0xfe9ffcff]
[    0.089588] pci 0000:00:02.2: supports D1 D2
[    0.089591] pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.089595] pci 0000:00:02.2: PME# disabled
[    0.089618] pci 0000:00:05.0: reg 10 32bit mmio: [0xfe9fc000-0xfe9fcfff]
[    0.089623] pci 0000:00:05.0: reg 14 io port: [0xdc00-0xdc07]
[    0.089640] pci 0000:00:05.0: supports D1 D2
[    0.089642] pci 0000:00:05.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.089646] pci 0000:00:05.0: PME# disabled
[    0.089670] pci 0000:00:08.0: reg 20 io port: [0xffa0-0xffaf]
[    0.089698] pci 0000:00:0a.0: reg 10 io port: [0xf80-0xf87]
[    0.089702] pci 0000:00:0a.0: reg 14 io port: [0xf00-0xf03]
[    0.089707] pci 0000:00:0a.0: reg 18 io port: [0xe80-0xe87]
[    0.089712] pci 0000:00:0a.0: reg 1c io port: [0xe00-0xe03]
[    0.089716] pci 0000:00:0a.0: reg 20 io port: [0xd000-0xd00f]
[    0.089721] pci 0000:00:0a.0: reg 24 io port: [0xc800-0xc87f]
[    0.089880] pci 0000:01:00.0: reg 10 32bit mmio: [0xe0000000-0xefffffff]
[    0.089887] pci 0000:01:00.0: reg 14 io port: [0xe000-0xe0ff]
[    0.089895] pci 0000:01:00.0: reg 18 32bit mmio: [0xfeae0000-0xfeaeffff]
[    0.089915] pci 0000:01:00.0: reg 30 32bit mmio: [0xfeac0000-0xfeadffff]
[    0.089939] pci 0000:01:00.0: supports D1 D2
[    0.089977] pci 0000:01:00.1: reg 10 32bit mmio: [0xfeafc000-0xfeafffff]
[    0.090021] pci 0000:01:00.1: supports D1 D2
[    0.090062] pci 0000:00:0b.0: bridge io port: [0xe000-0xefff]
[    0.090067] pci 0000:00:0b.0: bridge 32bit mmio: [0xfea00000-0xfeafffff]
[    0.090072] pci 0000:00:0b.0: bridge 32bit mmio pref: [0xe0000000-0xefffffff]
[    0.090103] pci 0000:02:08.0: reg 10 32bit mmio: [0xfebfe000-0xfebfffff]
[    0.090156] pci 0000:00:0e.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
[    0.090165] pci_bus 0000:00: on NUMA node 0
[    0.090170] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.090293] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.097028] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *9
[    0.097208] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[    0.097387] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[    0.097565] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *10
[    0.097742] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *11
[    0.097916] ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22) *5
[    0.098095] ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *9
[    0.098268] ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22) *11
[    0.098444] ACPI: PCI Interrupt Link [LKLN] (IRQs 20 21 22) *3
[    0.098620] ACPI: PCI Interrupt Link [LAUI] (IRQs 20 21 22) *0, disabled.
[    0.098793] ACPI: PCI Interrupt Link [LKMO] (IRQs 20 21 22) *0, disabled.
[    0.098967] ACPI: PCI Interrupt Link [LKSM] (IRQs 20 21 22) *0, disabled.
[    0.099141] ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22) *10
[    0.099323] ACPI: PCI Interrupt Link [LTIE] (IRQs 20 21 22) *0, disabled.
[    0.099538] ACPI: PCI Interrupt Link [LATA] (IRQs 22) *14
[    0.099771] SCSI subsystem initialized
[    0.099872] libata version 3.00 loaded.
[    0.099964] usbcore: registered new interface driver usbfs
[    0.099988] usbcore: registered new interface driver hub
[    0.100029] usbcore: registered new device driver usb
[    0.100175] ACPI: WMI: Mapper loaded
[    0.100177] PCI: Using ACPI for IRQ routing
[    0.100344] Bluetooth: Core ver 2.15
[    0.100375] NET: Registered protocol family 31
[    0.100377] Bluetooth: HCI device and connection manager initialized
[    0.100381] Bluetooth: HCI socket layer initialized
[    0.100384] NetLabel: Initializing
[    0.100386] NetLabel:  domain hash size = 128
[    0.100388] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.100405] NetLabel:  unlabeled traffic allowed by default
[    0.102706] pnp: PnP ACPI init
[    0.102736] ACPI: bus type pnp registered
[    0.107889] pnp: PnP ACPI: found 13 devices
[    0.107892] ACPI: ACPI bus type pnp unregistered
[    0.107897] PnPBIOS: Disabled by ACPI PNP
[    0.107914] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[    0.107918] system 00:07: ioport range 0x4000-0x407f has been reserved
[    0.107922] system 00:07: ioport range 0x4080-0x40ff has been reserved
[    0.107930] system 00:08: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.107934] system 00:08: iomem range 0xfee00000-0xfeefffff has been reserved
[    0.107938] system 00:08: iomem range 0xff380000-0xffffffff has been reserved
[    0.107946] system 00:0b: ioport range 0x290-0x29f has been reserved
[    0.107952] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[    0.107956] system 00:0c: iomem range 0xc0000-0xcffff could not be reserved
[    0.107960] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[    0.107964] system 00:0c: iomem range 0x100000-0x5fffffff could not be reserved
[    0.142712] AppArmor: AppArmor Filesystem Enabled
[    0.142738] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:01
[    0.142743] pci 0000:00:0b.0:   IO window: 0xe000-0xefff
[    0.142748] pci 0000:00:0b.0:   MEM window: 0xfea00000-0xfeafffff
[    0.142753] pci 0000:00:0b.0:   PREFETCH window: 0xe0000000-0xefffffff
[    0.142758] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:02
[    0.142761] pci 0000:00:0e.0:   IO window: disabled
[    0.142765] pci 0000:00:0e.0:   MEM window: 0xfeb00000-0xfebfffff
[    0.142768] pci 0000:00:0e.0:   PREFETCH window: disabled
[    0.142781] pci 0000:00:0e.0: setting latency timer to 64
[    0.142787] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.142791] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.142794] pci_bus 0000:01: resource 0 io:  [0xe000-0xefff]
[    0.142798] pci_bus 0000:01: resource 1 mem: [0xfea00000-0xfeafffff]
[    0.142801] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff]
[    0.142805] pci_bus 0000:02: resource 1 mem: [0xfeb00000-0xfebfffff]
[    0.142853] NET: Registered protocol family 2
[    0.142971] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.143400] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.144038] Switched to high resolution mode on CPU 0
[    0.144900] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.145682] TCP: Hash tables configured (established 131072 bind 65536)
[    0.145687] TCP reno registered
[    0.145836] NET: Registered protocol family 1
[    0.145925] Trying to unpack rootfs image as initramfs...
[    0.409545] Freeing initrd memory: 7465k freed
[    0.420334] cpufreq-nforce2: No nForce2 chipset.
[    0.420376] Scanning for low memory corruption every 60 seconds
[    0.420522] audit: initializing netlink socket (disabled)
[    0.420547] type=2000 audit(1264911492.420:1): initialized
[    0.431668] highmem bounce pool size: 64 pages
[    0.431675] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.433517] VFS: Disk quotas dquot_6.5.2
[    0.433587] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.434306] fuse init (API version 7.12)
[    0.434407] msgmni has been set to 1718
[    0.434672] alg: No test for stdrng (krng)
[    0.434685] io scheduler noop registered
[    0.434688] io scheduler anti[ciach!]tory registered
[    0.434691] io scheduler deadline registered
[    0.434741] io scheduler cfq registered (default)
[    0.434825] pci 0000:01:00.0: Boot video device
[    0.434931] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.434957] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.435111] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.435117] ACPI: Power Button [PWRF]
[    0.435185] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    0.435189] ACPI: Power Button [PWRB]
[    0.435445] processor LNXCPU:00: registered as cooling_device0
[    0.439126] isapnp: Scanning for PnP cards...
[    0.792779] isapnp: No Plug & Play device found
[    0.794062] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.794167] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.794501] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.795701] brd: module loaded
[    0.796280] loop: module loaded
[    0.796388] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[    0.796623] sata_nv 0000:00:0a.0: version 3.5
[    0.797010] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 22
[    0.797017]   alloc irq_desc for 22 on node -1
[    0.797020]   alloc kstat_irqs on node -1
[    0.797032] sata_nv 0000:00:0a.0: PCI INT A -> Link[LTID] -> GSI 22 (level, low) -> IRQ 22
[    0.797095] sata_nv 0000:00:0a.0: setting latency timer to 64
[    0.797216] scsi0 : sata_nv
[    0.797332] scsi1 : sata_nv
[    0.798098] ata1: SATA max UDMA/133 cmd 0xf80 ctl 0xf00 bmdma 0xd000 irq 22
[    0.798102] ata2: SATA max UDMA/133 cmd 0xe80 ctl 0xe00 bmdma 0xd008 irq 22
[    0.798206] pata_amd 0000:00:08.0: version 0.4.1
[    0.798242] pata_amd 0000:00:08.0: power state changed by ACPI to D0
[    0.798289] pata_amd 0000:00:08.0: setting latency timer to 64
[    0.798442] scsi2 : pata_amd
[    0.798531] scsi3 : pata_amd
[    0.799268] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    0.799272] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    0.800137] Fixed MDIO Bus: probed
[    0.800183] PPP generic driver version 2.4.2
[    0.800319] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.800607] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 21
[    0.800613]   alloc irq_desc for 21 on node -1
[    0.800616]   alloc kstat_irqs on node -1
[    0.800627] ehci_hcd 0000:00:02.2: PCI INT C -> Link[LUS2] -> GSI 21 (level, low) -> IRQ 21
[    0.800649] ehci_hcd 0000:00:02.2: setting latency timer to 64
[    0.800653] ehci_hcd 0000:00:02.2: EHCI Host Controller
[    0.800722] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
[    0.800756] ehci_hcd 0000:00:02.2: debug port 1
[    0.800761] ehci_hcd 0000:00:02.2: cache line size of 64 is not supported
[    0.800783] ehci_hcd 0000:00:02.2: irq 21, io mem 0xfe9ffc00
[    0.812018] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00
[    0.812126] usb usb1: configuration #1 chosen from 1 choice
[    0.812163] hub 1-0:1.0: USB hub found
[    0.812174] hub 1-0:1.0: 8 ports detected
[    0.812255] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.812577] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 20
[    0.812582]   alloc irq_desc for 20 on node -1
[    0.812585]   alloc kstat_irqs on node -1
[    0.812595] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 20 (level, low) -> IRQ 20
[    0.812612] ohci_hcd 0000:00:02.0: setting latency timer to 64
[    0.812616] ohci_hcd 0000:00:02.0: OHCI Host Controller
[    0.812678] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[    0.812709] ohci_hcd 0000:00:02.0: irq 20, io mem 0xfe9fd000
[    0.870094] usb usb2: configuration #1 chosen from 1 choice
[    0.870127] hub 2-0:1.0: USB hub found
[    0.870138] hub 2-0:1.0: 4 ports detected
[    0.870448] ACPI: PCI Interrupt Link [LUS1] enabled at IRQ 22
[    0.870453] ohci_hcd 0000:00:02.1: PCI INT B -> Link[LUS1] -> GSI 22 (level, low) -> IRQ 22
[    0.870464] ohci_hcd 0000:00:02.1: setting latency timer to 64
[    0.870467] ohci_hcd 0000:00:02.1: OHCI Host Controller
[    0.870505] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
[    0.870521] ohci_hcd 0000:00:02.1: irq 22, io mem 0xfe9fe000
[    0.926080] usb usb3: configuration #1 chosen from 1 choice
[    0.926112] hub 3-0:1.0: USB hub found
[    0.926122] hub 3-0:1.0: 4 ports detected
[    0.926193] uhci_hcd: USB Universal Host Controller Interface driver
[    0.926305] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.926308] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.926715] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.926792] mice: PS/2 mouse device common for all mice
[    0.926902] rtc_cmos 00:02: RTC can wake from S4
[    0.926943] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.926968] rtc0: alarms up to one year, y3k, 114 bytes nvram
[    0.927089] device-mapper: uevent: version 1.0.3
[    0.927223] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    0.927321] device-mapper: multipath: version 1.1.0 loaded
[    0.927324] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.927491] EISA: Probing bus 0 at eisa.0
[    0.927505] Cannot allocate resource for EISA slot 4
[    0.927508] Cannot allocate resource for EISA slot 5
[    0.927517] EISA: Detected 0 cards.
[    0.927574] cpuidle: using governor ladder
[    0.927577] cpuidle: using governor menu
[    0.928202] TCP cubic registered
[    0.928410] NET: Registered protocol family 10
[    0.928941] lo: Disabled Privacy Extensions
[    0.929296] NET: Registered protocol family 17
[    0.929325] Bluetooth: L2CAP ver 2.13
[    0.929327] Bluetooth: L2CAP socket layer initialized
[    0.929331] Bluetooth: SCO (Voice Link) ver 0.6
[    0.929333] Bluetooth: SCO socket layer initialized
[    0.929390] Bluetooth: RFCOMM TTY layer initialized
[    0.929394] Bluetooth: RFCOMM socket layer initialized
[    0.929396] Bluetooth: RFCOMM ver 1.11
[    0.929416] powernow-k8: Power state transitions not supported
[    0.929445] Using IPI No-Shortcut mode
[    0.929538] PM: Resume from disk failed.
[    0.929555] registered taskstats version 1
[    0.929701]   Magic number: 10:989:313
[    0.929806] rtc_cmos 00:02: setting system clock to 2010-01-31 04:18:13 UTC (1264911493)
[    0.929810] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.929812] EDD information not available.
[    0.948218] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.952036] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    0.960358] ata3.00: ATAPI: HL-DT-ST DVDRAM GSA-4163B, A102, max UDMA/33
[    0.960390] ata3: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:600:0x13)
[    0.961835] ata1.00: ATA-6: WDC WD1600JD-00HBB0, 08.02D08, max UDMA/133
[    0.961839] ata1.00: 312581808 sectors, multi 16: LBA48 
[    0.976314] ata3.00: configured for UDMA/33
[    0.977686] ata1.00: configured for UDMA/133
[    0.977826] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600JD-00H 08.0 PQ: 0 ANSI: 5
[    0.977982] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    0.978026] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    0.978075] sd 0:0:0:0: [sda] Write Protect is off
[    0.978079] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.978104] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.978246]  sda:
[    0.978369] ata2: SATA link down (SStatus 0 SControl 300)
[    0.981995] scsi 2:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-4163B A102 PQ: 0 ANSI: 5
[    0.990078]  sda1 sda2 <sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[    0.993806] Uniform CD-ROM driver Revision: 3.20
[    0.993922] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    0.993988] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    1.007188]  sda5 sda6 >
[    1.026274] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.158867] Freeing unused kernel memory: 540k freed
[    1.159557] Write protecting the kernel text: 4568k
[    1.159596] Write protecting the kernel read-only data: 1836k
[    1.343669] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[    1.405198] ACPI: PCI Interrupt Link [LKLN] enabled at IRQ 21
[    1.405209] forcedeth 0000:00:05.0: PCI INT A -> Link[LKLN] -> GSI 21 (level, low) -> IRQ 21
[    1.405218] forcedeth 0000:00:05.0: setting latency timer to 64
[    1.405265] nv_probe: set workaround bit for reversed mac addr
[    1.419342] Linux agpgart interface v0.103
[    1.424854] Floppy drive(s): fd0 is 1.44M
[    1.451974] FDC 0 is a post-1991 82077
[    1.513323] usb 2-4: new low speed USB device using ohci_hcd and address 2
[    1.559365] [drm] Initialized drm 1.1.0 20060810
[    1.590713] [drm] radeon default to kernel modesetting DISABLED.
[    1.591508] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 19
[    1.591515]   alloc irq_desc for 19 on node -1
[    1.591518]   alloc kstat_irqs on node -1
[    1.591529] pci 0000:01:00.0: PCI INT A -> Link[LNKD] -> GSI 19 (level, low) -> IRQ 19
[    1.591732] [drm] Initialized radeon 1.31.0 20080528 for 0000:01:00.0 on minor 0
[    1.750167] usb 2-4: configuration #1 chosen from 1 choice
[    1.762773] usbcore: registered new interface driver hiddev
[    1.772603] input: Microsoft MicrosoftÂ® 2.4GHz Transceiver V1.0 as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.0/input/input4
[    1.772690] generic-usb 0003:045E:071D.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft MicrosoftÂ® 2.4GHz Transceiver V1.0] on usb-0000:00:02.0-4/input0
[    1.842276] input: Microsoft MicrosoftÂ® 2.4GHz Transceiver V1.0 as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.1/input/input5
[    1.842381] generic-usb 0003:045E:071D.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft MicrosoftÂ® 2.4GHz Transceiver V1.0] on usb-0000:00:02.0-4/input1
[    1.842405] usbcore: registered new interface driver usbhid
[    1.842409] usbhid: v2.6:USB HID core driver
[    1.925091] forcedeth 0000:00:05.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:19:66:ea:3c:ce
[    1.925098] forcedeth 0000:00:05.0: csum timirq lnktim desc-v2
[    1.925593] agpgart-amd64 0000:00:00.0: AGP bridge [10de/00e1]
[    1.925624] agpgart-amd64 0000:00:00.0: aperture size 4096 MB is not right, using settings from NB
[    1.925631] agpgart-amd64 0000:00:00.0: setting up Nforce3 AGP
[    1.941059] agpgart-amd64 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    2.056029] usb 3-4: new full speed USB device using ohci_hcd and address 2
[    2.316153] usb 3-4: configuration #1 chosen from 1 choice
[    2.768829] PM: Starting manual resume from disk
[    2.768836] PM: Resume from partition 8:6
[    2.768839] PM: Checking hibernation image.
[    2.769030] PM: Resume from disk failed.
[    2.785786] EXT4-fs (sda5): barriers enabled
[    2.798804] kjournald2 starting: pid 350, dev sda5:8, commit interval 5 seconds
[    2.798823] EXT4-fs (sda5): delayed allocation enabled
[    2.798827] EXT4-fs: file extents enabled
[    2.810929] EXT4-fs: mballoc enabled
[    2.810948] EXT4-fs (sda5): mounted filesystem with ordered data mode
[    3.331340] type=1505 audit(1264911495.900:2): operation="profile_load" pid=373 name=/usr/share/gdm/guest-session/Xsession
[    3.334280] type=1505 audit(1264911495.902:3): operation="profile_load" pid=374 name=/sbin/dhclient3
[    3.334642] type=1505 audit(1264911495.902:4): operation="profile_load" pid=374 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[    3.334846] type=1505 audit(1264911495.902:5): operation="profile_load" pid=374 name=/usr/lib/connman/scripts/dhclient-script
[    3.380870] type=1505 audit(1264911495.950:6): operation="profile_load" pid=375 name=/usr/bin/evince
[    3.387156] type=1505 audit(1264911495.954:7): operation="profile_load" pid=375 name=/usr/bin/evince-previewer
[    3.391003] type=1505 audit(1264911495.958:8): operation="profile_load" pid=375 name=/usr/bin/evince-thumbnailer
[    3.410834] type=1505 audit(1264911495.978:9): operation="profile_load" pid=377 name=/usr/lib/cups/backend/cups-pdf
[    3.411284] type=1505 audit(1264911495.978:10): operation="profile_load" pid=377 name=/usr/sbin/cupsd
[    4.338040] udev: starting version 147
[    4.396361] Adding 3212960k swap on /dev/sda6.  Priority:-1 extents:1 across:3212960k 
[    5.109986] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    5.144301] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000
[    5.144325] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x5040
[    5.240331] parport_pc 00:06: reported by Plug and Play ACPI
[    5.240382] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[    5.250278] lp: driver loaded but no devices found
[    5.336222] lp0: using parport0 (interrupt-driven).
[    5.507148] ppdev: user-space parallel port driver
[    5.579817] cfg80211: Calling CRDA to update world regulatory domain
[    6.048180] EXT4-fs (sda5): internal journal on sda5:8
[    6.805644] pci 0000:00:0b.0: can't derive routing for PCI INT B
[    6.805650] HDA Intel 0000:01:00.1: PCI INT B: no GSI - using IRQ 11
[    7.408269] irq 11: nobody cared (try booting with the "irqpoll" option)
[    7.408279] Pid: 0, comm: swapper Not tainted 2.6.31-14-generic #48-Ubuntu
[    7.408283] Call Trace:
[    7.408296]  [<c056e41c>] ? printk+0x18/0x1c
[    7.408305]  [<c0190ee7>] __report_bad_irq+0x27/0x90
[    7.408310]  [<c018f8fc>] ? handle_IRQ_event+0x4c/0x140
[    7.408315]  [<c01910a0>] note_interrupt+0x150/0x190
[    7.408320]  [<c01915fc>] handle_fasteoi_irq+0xac/0xd0
[    7.408325]  [<c0105a38>] handle_irq+0x18/0x30
[    7.408329]  [<c0104f07>] do_IRQ+0x47/0xc0
[    7.408335]  [<c014b630>] ? irq_exit+0x50/0x70
[    7.408339]  [<c011dcf7>] ? smp_apic_timer_interrupt+0x57/0x90
[    7.408343]  [<c01039b0>] common_interrupt+0x30/0x40
[    7.408348]  [<c016a912>] ? tick_nohz_stop_sched_tick+0x52/0x390
[    7.408353]  [<c0102010>] cpu_idle+0x70/0xd0
[    7.408359]  [<c055e875>] rest_init+0x55/0x60
[    7.408366]  [<c078e8cd>] start_kernel+0x2e6/0x2ec
[    7.408371]  [<c078e406>] ? unknown_bootoption+0x0/0x1ab
[    7.408376]  [<c078e07c>] i386_start_kernel+0x7c/0x83
[    7.408378] handlers:
[    7.408380] [<f80c2730>] (azx_interrupt+0x0/0x150 [snd_hda_intel])
[    7.408392] Disabling IRQ #11
[    7.671522] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 18
[    7.671531]   alloc irq_desc for 18 on node -1
[    7.671534]   alloc kstat_irqs on node -1
[    7.671546] rt2500pci 0000:02:08.0: PCI INT A -> Link[LNKA] -> GSI 18 (level, low) -> IRQ 18
[    7.987722] cfg80211: World regulatory domain updated:
[    7.987728] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    7.987732] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    7.987736] 	(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    7.987740] 	(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    7.987743] 	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    7.987747] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.038150] ip_tables: © 2000-2006 Netfilter Core Team
[    8.082724] phy0: Selected rate control algorithm 'minstrel'
[    8.083575] Registered led device: rt2500pci-phy0::radio
[    8.083595] Registered led device: rt2500pci-phy0::quality
[    8.241558] usbcore: registered new interface driver snd-usb-audio
[    9.818732] __ratelimit: 3 callbacks suppressed
[    9.818738] type=1505 audit(1264907902.386:12): operation="profile_replace" pid=819 name=/usr/share/gdm/guest-session/Xsession
[    9.829080] type=1505 audit(1264907902.398:13): operation="profile_replace" pid=823 name=/sbin/dhclient3
[    9.829446] type=1505 audit(1264907902.398:14): operation="profile_replace" pid=823 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[    9.829651] type=1505 audit(1264907902.398:15): operation="profile_replace" pid=823 name=/usr/lib/connman/scripts/dhclient-script
[    9.839240] type=1505 audit(1264907902.406:16): operation="profile_replace" pid=824 name=/usr/bin/evince
[    9.846314] type=1505 audit(1264907902.414:17): operation="profile_replace" pid=824 name=/usr/bin/evince-previewer
[    9.850837] type=1505 audit(1264907902.418:18): operation="profile_replace" pid=824 name=/usr/bin/evince-thumbnailer
[    9.858891] type=1505 audit(1264907902.426:19): operation="profile_replace" pid=827 name=/usr/lib/cups/backend/cups-pdf
[    9.859339] type=1505 audit(1264907902.426:20): operation="profile_replace" pid=827 name=/usr/sbin/cupsd
[    9.862637] type=1505 audit(1264907902.430:21): operation="profile_replace" pid=828 name=/usr/sbin/tcpdump
[   11.147042] eth0: no link during initialization.
[   11.147578] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   11.301918] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   19.808049] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[  320.169656] eth0: no link during initialization.
[  320.170157] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  320.188420] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Użytkownik Evilus edytował ten post 30 styczeń 2010, 21:12